Probe PI-07P: Isotropic Electric Field Probe for Pulse and Average HIRF Applications 100 MHz-60 GHz, 4-3000 V/m

April 13, 2021


The PI-07P probe works in the frequency range  100 MHz – 60 GHz, covering most of the test requirements of   MIL STD-464, RTCA-DO-160, FAA HIRF Rule & Advisory Circular 20-158, Boeing, Airbus and automotive EMC GM and Ford specifications.

in Pulse mode (with included PU-5P power unit) it measures the amplitude of pulsed RF fields from RF and microwave sources (microwave radars) with fast sampling detection capability of 1 us (one microsecond).  In Average mode it operates as standard isotropic field probe, measuring the RMS field strength of CW and AM/FM modulated signals.

PI-07 Ultrabroadband Electric Probe: 2 MHz – 60 GHz, 4-1000 V/m

January 5, 2020

Ultrabroadband isotropic electric field probe PI-07 extends the requirements of most EMC and RF safety standards for industrial, military and communication applications. It covers all RF and microwave frequency bands from MF up to M band, thus providing a versatile measuring tool for all 5G upcoming applications.

Isotropic Omnifield Antenna® OFA-GH 30MHz-6GHz, 5 mV/m-500 V/m

July 31, 2019


OFA-G_with SA-on the table  OFA-G In box without cable

A unique broadband active E- field isotropic (spherically isotropic) antenna for RF spectrum monitoring. Connects to any spectrum analyzer, and has frequency response practically independent of antenna orientation or electric field direction. Offers high maximum field strength limit of 500 V/m and broad dynamic range for the variety of RF regulatory, safety, EMC, wireless and telecommunications applications.  This antenna is a variant of  OFA-G antenna  but has about 20 dB higher overload limit and higher dynamic range.

Omnifield Antenna® consists of three parts: antenna head, handle and power unit. Antenna head and handle comprise a single module while power unit is detachable from the handle to allow convenient storage in the supplied rugged plastic case. For normal operation handle must be connected to the power unit to provide power to the antenna head.  Antenna head has 3 antennas positioned normal to each other.  Signals from each antenna are combined and amplified to allow utput signal of Omnifield Antenna® to be proportional to the absolute value of the field regardless of the field direction.  Power unit contains the rechargeable battery and connectors for the antenna and output cable. Ferrite beads, located on this cable, decouple the antenna from spectrum  analyzer and reduce the effects of this analyzer on measured field. This cable also allows operator to have freedom to place the antenna in right position either on non-metal table tripod (supplied with every system) or onto optional 5 feet adjustable tripod.

Isotropic Ultra Broadband Electric Field Probe PI-05 1 MHz- 40 GHz, 2 – 1000 V/m

May 13, 2014

Isotropic Ultra Broadband Electric Field Probe PI-05 1 MHz- 40 GHz, 2 – 1000 V/m.

Modern design probe PI-05, extends the
requirements of most EMC and RF safety standards for industrial, military and
radar communication applications.
High overload field strength limit and
operation up to 40 GHz makes this probe a versatile measuring tool for all
applications including the microwave K-Band.  This probe works with all RFP-05
type meters.

Smart Fieldmeter® Digital RFP-05M

May 16, 2013


Smart Fieldmeter® Digital RFP05M

Electromagnetic field monitor having flexible and expandable architecture, state of the art design with convenience and simplicity for users on a budget.

SFD can be used for evaluation and measurements of EM fields for:

  • • Safety and regulatory assessment of AM/FM/TV and GSM cellular transmitters.
  • • Safety and Regulatory assessment of microwave ovens and RF heating equipment.
  • • Monitoring of the RF radiation from industrial, scientific and medical equipment.
  • • Monitoring of RF fields from GTEM cells and antennas for EMC testing of consumer, industrial, automotive and military products.
  • • Data logging of RF fields during Electrosmog testing and environmental monitoring in stand alone and remotely controlled testing sites.
  • • Personal RF field monitoring and protection.

Meter Power 2  Meter Logo 2 SFD_Large_Screen promo

Main Features

• Model RFP-05M is a development of the model RFP-05 and has two main advantages:

1. Compatibility with Insulated Modem (IM) accessory, allowing both fiber optic and USB RF isolated bidirectional control and battery charging without any additional wires coming out of the meter.

2.  Graphical display to plot the data real time.

  • Operates with and stores the data of multiple probes, both current and future models.
  • Large dynamic range with autoranging and auto-zero functions offers high accuracy and simple operation.
  • Advanced programmable data sampling with time and space averaging allows monitoring and recording of time variable signals.
  • Internal data logging with removable flash memory card offers programmable and practically unlimited data storage.
  • Serial bidirectional data port and IR remote control for PC data transfer and wireless instrument control.
  • Bright color OLED display with good visibility can be set to display only the information important to the user.
  • Portable lightweight design with detachable isotropic probe and two-cell AA primary or rechargeable battery offers flexibility and advantages in the field.